top of page

Emulsions

Geared up for production:

With superior lubricity and a higher oil content, TRIM® emulsions provide a greater boundary layer between the tool and the material. TRIM Emulsions are ideal for lower, less than 600 SFPM, applications such as broaching, reaming, deep hole drilling, drilling, tapping, and centerless grinding.

Emulsions work well for machining copper, yellow metals, steel alloys, cast aluminums, wrought aluminums, and tough-to-machine titanium and nickel-based alloys.

Number of products in category is 15

Products

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

​

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines

  • Contains highly effective extreme-pressure additives to control built-up edge

  • Compatible with all ferrous and nonferrous materials

  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut

  • Rejects tramp oil to help extend sump life and increase recycling options

  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures

  • Coolant residue is easily removed with water, working solution, or aqueous cleaners

  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

E206-5g.jpg

Download Data Sheet

TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)

  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines

  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures

  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners

  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL®

General-purpose Emlusion

SOL-5g.jpg

Download Data Sheet

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

 

 

  • Very stable formula provides long operational life with consistent performance

  • Extremely hard water tolerant

  • Very wide application range, suitable for both grinding and machining

  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut

  • In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes

  • Compatible with aluminum, steel alloys, cast iron, and yellow metals

  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures

  • Coolant is easily removed with water, working solution, or aqueous cleaners

  • Easy recycling or disposal with conventional techniques and equipment

  • Does not contain or test positive for phenol

  • Will run effectively for long periods without the need for costly additives

TRIM® E709

Long-life Emulsion

30020621.png

Download Data Sheet

CoolPAK™ COMSOL IIC is an emulsion (or soluble oil) coolant base for use on aluminum, especially die cast aluminum wheels and other high-value parts.

  • Specialized blend of extreme pressure ingredients provide good surface finish and tool life

  • Easily washed off for improved finish operation performance and reduced cleaning costs

  • Easily managed for extended sump life and low total operating cost

  • Safe operator-friendly formulation proven by independent lab testing

  • Consistent formulation for predictable performance and additive response

  • Although designed for aluminum, the formula performs well with both ferrous and nonferrous materials

COOLPAK® COMSOL IIC

Aluminum Wheel Machining Emulsion

COMSOL IIC.png

TRIM® E738 is a soluble oil or chemical emulsion coolant concentrate designed for magnesium alloy machining. It provides excellent performance for high-temperature aerospace alloy and cast magnesium alloy. TRIM E738 consists of micro-molecular particle which has such advantages as low mist, good cleaning and wetting performance. This product is a kind of micro-molecular emulsion that provides mechanical lubrication, and it is safe and very popular with operators.

​

  • Extremely hard water tolerance

  • Extremely alkalinity reservation and release capability

  • Very closely emulsion particle structure that provides excellent wetting and cooling necessary

  • Can reach the cutting area even in the very high-speed cutting situation

  • Leaves a fluid residue to keep machine tool very clean

  • Prevents hydrogen and magnesium salts

  • Easy recycling or disposal with conventional techniques and equipment

  • Contains a highly effective extreme-pressure (EP) additive to control built-up edge (BUE).

TRIM® E738

30020639.jpg
  • Facebook
bottom of page